Shear Cracks Explained (How Shear In Reinforced Concrete Works)
In this article, you’ll learn why shear cracks develop near supports and how you can add reinforcement to avoid it.
![Shear Verification Without Shear Reinforcement [Eurocode]](https://www.structuralbasics.com/wp-content/uploads/2024/11/Shear-verification-without-shear-reinforcement-768x439.jpg)
Shear Verification Without Shear Reinforcement [Eurocode]
In this article, you’ll learn the step-by-step process of verifying shear without shear reinforcement of rc elements like beams and slabs.
Bending Verification Of Reinforced Concrete {Eurocode}
In this post, you’ll learn the step-by-step process of verifying bending of reinforced concrete elements like beams and slabs.
![Compression Verification Of Reinforced Concrete [Eurocode]](https://www.structuralbasics.com/wp-content/uploads/2024/10/Compression-verification-of-reinforced-concrete-768x439.jpg)
Compression Verification Of Reinforced Concrete [Eurocode]
In this article, you’ll learn where the compression capacity of concrete is critical and how to verify it according to Eurocode.
Concrete And Reinforcement Properties For Structural Design {Introduction}
In this post, you’ll learn what properties are important, where you find them and how to calculate them.
![Horizontal Load Transfer In Structural Engineering [2024]](https://www.structuralbasics.com/wp-content/uploads/2024/09/Horizontal-load-transfer-768x439.jpg)
Horizontal Load Transfer In Structural Engineering [2024]
In this article, you’ll learn how to transfer horizontal loads through buildings and other structures down to the foundation by using stabilizing elements.
![Vertical Load Transfer In Structural Engineering [2024]](https://www.structuralbasics.com/wp-content/uploads/2024/09/Vertical-load-transfer-1-768x439.jpg)
Vertical Load Transfer In Structural Engineering [2024]
In this article, you’ll learn how loads travel through a structure from the roof to the foundations and how you apply the loads to the static systems of the elements.
Impact Loads From Vehicles {Accidental Actions}
In this article, you’ll learn how to calculate and apply impact loads from vehicles on buildings and other structures.
Imperfection Loads In Structural Engineering {2024 Guide}
In this step-by-step guide, you’ll learn how to calculate the imperfection loads on horizontal elements like floors according to Eurocode 2.
![Earth Pressure Calculation On Underground Structures [2024]](https://www.structuralbasics.com/wp-content/uploads/2024/07/Earth-pressure-calculation-768x439.jpg)
Earth Pressure Calculation On Underground Structures [2024]
In this article, you’ll learn how to calculate the earth pressure from vertical stresses, hydrostatic pressure, vertical loading on terrain and cohesion